Spray Finishing
Joinery spray painting for trade workshops
Trade joinery sprayed, cured and wrapped, ready to go straight to site.
What this is
Most joinery shops do not want a spray booth of their own, and they do not need one. Send the work here, we finish it to your sample and send it back wrapped, labelled and hard enough to handle.
- Racked, not stacked — Work is racked while it cures, so nothing prints or sticks.
- To your sample — We match your board and keep it on file for the next batch.
- Wrapped for site — Foam-wrapped and labelled by opening or room.
- Collection and delivery — Our own vans, so it is not handled by a courier.
On the floor
How joinery spray finishing runs here
Trade joinery sprayed, cured and wrapped, ready to go straight to site. Assembled units go into the hand booths, where the awkward faces can be reached properly.
- Booths
- Three booths plus a Makor robotic line
- Capacity
- Batches from one door to a full house
- Cure
- Heated, dust-filtered
Why this matters
Why people use us for joinery spray finishing
What you actually get out of putting joinery spray finishing through us, rather than a price list.
- 01
Ready for site
Cured, checked and wrapped, so it can be fitted the day it arrives instead of gassing off in a corner.
- 02
Booked slots, not a queue
Your work gets a slot on the programme, so you can promise your own customer a date.
- 03
Collection and delivery
We collect locally on our own vans and bring it back blanket-wrapped.
- 04
Prep we do not skip
Most of the price is preparation, because that is what the finish is actually made of.
How it goes
Sprayed in the round
Assembled units go into the hand booths, where the awkward faces can be reached properly.
How it fits our process
One programme, start to finish
Where joinery spray finishing sits in the run, and what happens either side of it in the same building.
- Stage 1
Colour and sample
Matched to RAL, NCS, Pantone or your sample, sprayed on a board for sign-off.
- Stage 2
Collected or delivered in
We collect locally on our own vans, or you drop it at the workshop.
- Stage 3
Prepared
Cleaned, filled, sanded and masked — the part of the job the finish depends on.
- Stage 4
Primed and topcoated
Robotic line for volume, hand booths for one-offs and assemblies.
You are here - Stage 5
Checked and returned
Inspected under strong light, wrapped, then delivered or refitted.
Questions we are asked
How should I prepare the work?
Sanded to 180 grit, filled and clean. We flat it again here, but we cannot fix poor preparation with paint.
Do you collect?
Yes, within the M25 as standard and further by arrangement.
Can you spray fitted work on site?
Yes, for joinery that is already fitted. On-site spraying is £180 + VAT per square metre with a minimum charge of £1,350 + VAT for the day, because we mask, screen and extract properly. We do not spray walls or ceilings.
What do you charge?
Priced per item or per square metre once we have seen the work. A twenty-door kitchen is usually around £2,200 plus VAT.
How should the work arrive?
Sanded, with hardware off and any dents already filled if you can. We will do the prep instead if you would rather — it is on the quote either way.
Often ordered with this
What it costs
Prices and dates for joinery spray finishing
A run of assembled joinery sprayed in the hand booths. That is a guide taken from work we have actually run — your own price for joinery spray finishing is confirmed in writing once we have the sizes or the drawings, and the date we give you is the date we hold.
- Rough price
- From about £58 plus VAT an hour of booth time
- How long
- 5 to 8 working days
- Invoiced by
- Painted Ltd
Proof
Recent work of this kind
Next step
Tell us what you need
Send drawings, sizes or photographs and we will price it in writing, usually within two working days. If it is quicker to talk it through, call 020 8944 2817 and you will get someone who knows the machines.
What we need, what you get
Send sizes, materials and the finish you want — drawings in any form, or photos and a few measurements. Back you get a fixed written price, a date we hold to, and the work delivered to site on our own vans from our workshop in Croydon.
Machining, finishing and assembly all happen in the same building, so nothing waits on another supplier and nothing gets damaged being moved between them.
See the machinery