Bespoke Joinery
Commercial joinery for fit-out work
Fit-out joinery made to programme, delivered with the paperwork site needs.
What this is
Contract work runs on dates and documents as much as on joinery. We hold the programme, issue drawings for approval, and turn up with RAMS, insurance and cards in order.
- Programme held — Dates agreed at order and reported against weekly.
- Drawings issued — For comment and approval before manufacture starts.
- Site paperwork — RAMS, insurance, CSCS cards and O&M information supplied.
- Fitted out of hours — Evening and weekend fitting where the building needs it.
On the floor
How commercial joinery runs here
Fit-out joinery made to programme, delivered with the paperwork site needs. Phased and delivered to your dates, with the drawings and certificates the site asks for.
- Sectors
- Offices, retail, hospitality, education, healthcare
- Typical scope
- Reception, counters, seating, linings, washrooms
- Fire rating
- Fire-rated board and certified linings available
Why this matters
Why people use us for commercial joinery
What you actually get out of putting commercial joinery through us, rather than a price list.
- 01
Made to programme
Dates are planned on our own production board, so a fit-out date is one we can actually hold.
- 02
Paperwork site needs
O&M information, fire certification and RAMS come with the delivery rather than a fortnight later.
- 03
Built for public use
Materials, edges and fixings are specified for daily commercial wear, not domestic use.
- 04
Delivered to a live site
Wrapped, labelled by area and delivered on our own vans to suit the site's access and hours.
How it goes
Made to a programme
Phased and delivered to your dates, with the drawings and certificates the site asks for.
In our own workshop
Made here, start to finish
Nothing is sent out to another workshop. Every stage below happens under one roof in Croydon, which is why the dates hold and the finish matches.
Board cutting
Your boards are squared and cut to the tenth of a millimetre on the beam saw, not on a hand saw on site, so doors line up and gaps stay even.
How we do itEdge banding
Every exposed edge is machine-banded with a glue line you cannot feel, so it does not lift in a warm kitchen or a steamy bathroom.
How we do itCNC machining
Hinge cups, shelf holes and jointing are cut by the router from the drawing you approved, so what is built matches what you signed off.
How we do itVeneer pressing
Real wood veneers are bonded flat in our own press, so a veneered island or wardrobe front stays flat for years.
How we do itBench assembly
Cabinetmakers build and dry-fit the run on the bench here, so problems are found in the workshop and not in your house.
How we do itSpray finishing
Everything is sprayed in our own booths before it travels, which gives a flat factory finish you cannot get with a brush on site.
How we do itHow it fits our process
One programme, start to finish
Where commercial joinery sits in the run, and what happens either side of it in the same building.
- Stage 1
Survey and design
We measure the room, agree the layout and send drawings to approve.
- Stage 2
Cut and machined
Your parts cut and machined from the approved drawings.
- Stage 3
Built on the bench
Carcases and doors assembled and dry-fitted here before any paint.
- Stage 4
Sprayed in our booths
Primed, denibbed and topcoated in your colour.
- Stage 5
Delivered and fitted
Wrapped, labelled by room, fitted by our own joiners.
Questions we are asked
Can you work to a main contractor's programme?
Yes. We take the programme at order and report progress against it every week.
Do you provide O&M information?
Yes — finishes, materials, certificates and care instructions at handover.
Can you supply fire-rated joinery?
Yes, including certified fire door sets and fire-rated board, supplied with the certification for the O&M file.
Do you work outside site hours?
We do. Deliveries and fits are booked to suit the site, including evenings and weekends where access demands it.
Often ordered with this
Wall panelling
Set out to the room so the panels land where the eye expects them.
Bespoke kitchens
Made to your room, sprayed in your colour and fitted by the people who made it — a fixed written price before anything is cut, and 8 to 12 weeks from sign-off.
Bookcases
Shelves that stay straight, in a run that fits the wall exactly.
What it costs
Prices and dates for commercial joinery
A reception desk and back wall for a London office fit-out. That is a guide taken from work we have actually run — your own price for commercial joinery is confirmed in writing once we have the sizes or the drawings, and the date we give you is the date we hold.
- Rough price
- From about £11,000 plus VAT
- How long
- 5 to 7 weeks, phased to your programme
- Invoiced by
- Painted Bespoke Joinery Ltd
Proof
Recent work of this kind
Next step
Tell us what you need
Send drawings, sizes or photographs and we will price it in writing, usually within two working days. If it is quicker to talk it through, call 020 8944 2817 and you will get someone who knows the machines.
What we need, what you get
Send sizes, materials and the finish you want — drawings in any form, or photos and a few measurements. Back you get a fixed written price, a date we hold to, and the work delivered to site on our own vans from our workshop in Croydon.
Machining, finishing and assembly all happen in the same building, so nothing waits on another supplier and nothing gets damaged being moved between them.
See the machinery