PAINTEDGroup
Doors being sprayed in the Painted finishing booth

Wardrobe and door spraying

Wardrobe spraying and door spraying — a smooth finish brush paint can't give

Fitted wardrobe doors, internal doors and panelling primed and sprayed in our booths, for homeowners, developers and fitters.

Why spray doors

Doors are handled every day, so the finish has to last

Wardrobe and internal doors take more knocks and fingermarks than almost anything else in a home. A sprayed, two-pack finish is smooth, even and much tougher than brush-applied paint.

We spray fitted wardrobe doors you already have, new doors before they are hung, and whole house sets for developers and fitters. Everything is sprayed in our Croydon booths, faces and edges, so nothing is left bare to take in moisture.

Mirrored, glazed or panelled doors are masked and finished by hand where the spray cannot reach cleanly.

Fitted bedroom wardrobes with panelled doors sprayed in off-white eggshell
Fitted wardrobes in a London bedroom. Illustrative photo.

What we spray

Doors of every kind

Fitted wardrobe doors

Hinged and sliding doors, drawer fronts and side panels.

Internal doors

Panelled, flush, Shaker and moulded doors, both faces and edges.

Glazed doors

Glass masked off, frames and beads sprayed cleanly.

Panelling

Wall panelling, wardrobe end panels and fillers sprayed to match.

New doors

Raw or primed doors sprayed before hanging, so fitters only hang them.

House sets

Batches for developers and fitters, colour checked across every door.

How it is done

How a door is sprayed

  1. 01

    Check and agree

    We look at your photos or doors and agree colour and sheen.

  2. 02

    Hardware off

    Hinges, handles and locks removed and kept with each door.

  3. 03

    Preparation

    Cleaned, keyed, filled and sanded; old flaking paint taken back.

  4. 04

    Primer

    A primer to suit the material — never top coat straight onto bare board.

  5. 05

    Top coat

    Colour sprayed on faces and edges, then cured hard in the booth.

  6. 06

    Back to you

    Doors wrapped and returned ready to hang, or refitted where agreed.

Finisher spraying a four-panel internal door in a spray booth
An internal door being sprayed in the booth. Illustrative photo.

Finish and colour

Finish to suit the room

Dead matt

Soft and chalky to look at, popular on deep colours and period homes.

Eggshell

A low sheen that wipes clean and hides everyday fingermarks.

Satin

A gentle reflection that lifts a darker room without showing every mark.

Gloss

Flatted and polished to a deep shine. Best on flat, smooth surfaces.

We can match a colour from any paint brand's chart, a sample door, a fabric or a tin you already have. Before the full job is sprayed, you can sign off a sample so there are no surprises.

Common questions

Wardrobe and door spraying questions

Can you spray wardrobe doors that are already fitted?
Yes. The doors are taken off, sprayed in our booth and refitted. Frames and fixed panels that cannot come out are discussed with you first.
Can you spray sliding wardrobe doors?
Yes, as long as the panels can be taken out of their frames or the frames can be masked. We check this from your photos.
Do you spray new doors before they are hung?
Yes. Spraying doors before hanging gives the best finish and saves painting on site. Send the door type and sizes.
Do you spray both sides of a door?
Yes. Both faces and all edges are sealed and sprayed, so the door stays stable and looks finished whichever way it opens.
Can you match the colour of my walls or other joinery?
Yes. Give us the paint name, or a sample, and we match it.

Get a quote

Send photos of the doors, how many there are, and the rough sizes. For new doors, tell us the door type. We will come back with a written quote.

Related services: kitchen spraying, furniture spray painting, MDF spraying, uPVC spraying, front door spraying, staircase spraying, Valchromat, bespoke joinery, colour matching.